Ford Falcon BA/BF GTW3884R Turbocharger Upgrade

0 Rating
$ 3235.00
SKU: G841691-BA115
Garrett GTW3884R Ball Bearing Bolt On Upgrade to suit the Ford Falcon XR6T BA and BF Model
T/Housing Ceramic Coating (7 business days)
 Back to: Turbochargers Bolt On Upgrade
2-3d.gif

This custom built Garrett GTW3884R is one of the largest bolt-on Upgrade Turbochargers for the BA/BF Falcon XR6 Turbo. With 900 flywheel horesepower capabilities, the GTW3884R is for the serious users who want to make over 650rwhp, in a low mounted factory bolt on combination. The GTW3884R comes with a specifically designed 1.15a/r Turbine Housing, with a HUGE 38mm wastegate port, and 42mm Wastegate flapper.

  • Bearing Type: Ball Bearing
  • Cooling System:Oil & Water Cooled
  • Horsepower: 700-900hp
  • Application: Ford Falcon XR6 BA/BF Models
  • Actuator: GCG Billet 14psi (supplied with additional 5psi spring to bring the minimum boost to 19psi if required)
  • Expected Power: Proven 500rwkw+ with supporting modifications, and E85 fuel

PRODUCT FEATURES:

  • Turbine Housing - 1.15a/r
  • Factory Turbo Orientation - Oil Feed, Water Lines and Dump Pipe connection is in an identical position to the factory setup, allowing for easy re-fitment.
  • Factory Turbo Position - These turbochargers still look very similar to a factory unit, and utilize the factory manifold, and exhaust system.
  • Ultimate Boost Control - Largest Wastegate Porting, and largest Wastegate flapper to match, ensuring consistent boost control throughout the rev range.
  • Supporting Re-Fitment Parts - Exhaust studs, locking nuts for the dump pipe, and a complete turbocharger gasket kit is included.

SO, WHATS LEFT TO DO ONCE IT'S FITTED?

  • Oil Drain Fitting - The GTW has a larger oil drain bolt span than a factory GT3582R, so a suitable oil drain kit is required. We offer a specifically designed direct fitment oil drain kit for this turbocharger upgrade (see related items)
  • Air Inlet Hose/Pipe - The factory turbocharger has a 3.0" Inlet, the GTW3884R has a 4.0" Inlet. Depending on what style of Power Steering pump and Reseviour the vehicle has, you may require a tight radius elbow or custom fabrication to meet your factory/aftermarket airbox/air intake.
  • Air Outlet Hose/Pipe - The factory turbocharger has a 2.0" Outlet, the GTW3884R has a 2.5" Outlet. Again, this can be as simple as a reducer hose, or some slight fabrication to make it all go together.

Thats It! - Extremely simple to re-fit, with minimal modifications to adapt to your existing setup!

Units in box: 1

Reviews

There are no reviews for this product yet.