Ford Falcon BA/BF GTX3584RS GEN II Turbocharger

0 Rating
$ 3540.00
SKU: G856804-5200S
T/Housing Ceramic Coating (7 business days)
 Back to: Turbochargers Bolt On Upgrade

This custom built Garrett GTX3584RS GEN II is designed as a bolt on Upgrade Turbochargers for the Ford Falcon BA-BF XR6 Turbo. With 1000 flywheel horesepower capabilities, the GTX3584RS GEN II is for the serious users who want to make over 700rwhp, in a low mounted factory bolt on combination. The GTX3584RS GEN II comes with a specifically designed 1.15a/r Turbine Housing, with an upgraded 40mm Wastegate flapper.

This is the HIGHEST Horsepower rated bolt on Turbocharger on the market.

  • Bearing Type: Ball Bearing
  • Cooling System:Oil & Water Cooled
  • Horsepower: 550-1000hp
  • Application: Ford Falcon XR6 FG Models
  • Actuator: GCG Billet 14psi (supplied with additional 5psi spring to bring the minimum boost to 19psi if required)
  • Expected Power: Proven 580rwkw+ with supporting modifications, and E85 fuel


  • Turbine Housing - 1.15a/r Turbine Housing allows for the ultimate in performance and reduced back pressure, without sacrificing excessive boost response.
  • Factory Turbo Orientation - Oil Feed, Oil Drain, Water Lines and Dump Pipe connection is in an identical position to the factory setup, allowing for easy re-fitment.
  • Factory Turbo Position - These turbochargers still look very similar to a factory unit, and utilize the factory manifold, and exhaust system.
  • Ultimate Boost Control - Largest Wastegate Porting, and largest Wastegate flapper to match, ensuring consistent boost control throughout the rev range.
  • Supporting Re-Fitment Parts - Dump Pipe Studs & Locking Nuts, and a complete Turbocharger Gasket Kit is included.


  • Compressor Inlet Hose/Pipe - The factory turbocharger has a 3.0" Inlet, the GTX3584RS GEN II has a 4.0" Inlet. A simple reducer hose, or a little fabrication may be required to adapt to your intake existing setup. We recommend using a pre-fabricated Airbox to suit (Plazmaman / Process West)
  • Compressor Outlet Hose/Pipe - The factory turbocharger has a 2.0" Outlet, the GTX3584RS GEN II has a 2.5" Outlet. Again, this can be as simple as a reducer hose, or some minor fabrication to make it all go together.

Thats It! - Extremely simple to re-fit, with minimal modifications required to adapt to your existing setup!

Units in box: 1


There are no reviews for this product yet.